Standard Liquid Leak Sensor RS-3000 Series

By optical detecting principle, most all kinds of liquid can be detected quickly.
No adjustment is required for the sensor, then very few risk for setting error Versatile on performance, and low cost on its expense for both of human and material.

RS-3000

Quick Detection for variety of liquid. (NPN OUTPUT)

・ Quick Detection for variety of liquid, even low viscosity without absorbent paper.
・ By the featured double sensing devices, incorrect position of the sensor is alarmed.
・ Body fabricated by PFA, which allows use with most liquids and chemicals, and suitable for use in varied applications, particularly chemical blend and dispenser.

Specification

After leak detection, simple wipe the detection surface. much easier process than with detection tape or a liquid absorbing model.

・Body and cable are protected by PFA
・Suitable for export equipment, CE marking, UL certified.
・RS-3000C unit has DIN rail installation feature without auxiliary parts
・Easily viewable green LED signifies normal operations when red LED turns on, Liquid is detected and output is shut off.

RS-3000 Series Detection Unit

Model RS-3000FA RS-3000FAP
Voltage DC12V to DC24V (±10%)
Current 20mA or below
LED Display Normal Status : Green
Leakage Alarm :Red
Wrong position Alarm: Red
Output NPN transistor open collector, 50mA max, Normal: ON
Ambient Temp -10〜60℃
Material Case PFA
Cable FEP, 3-wire sheath
LED Epoxy resin (embedded in the case)
Water Protect Sealed, Equivalent IP67(IEC)
Weight Approx. 40g
Absorbent Paper Use Not Use
Bracket P/N-6440(PVC) P/N-6430(PVC)

RS-3000 Series Control Unit

・Output of the control unit, RS-3000C is a relay, NC contact, which makes fit with fail-safe architecture.
・Compact in size of RS-3000C unit with connector wiring helps easier and reliable wiring job.
RS-3000 Series Control Unit
Model RS-3000C
Voltage DC24V(±10%)
Current 200mA or below
Number of Input 1 to 8 detection units max
LED Display Independent display for each Input 
(LED 8ea ×Green or Red either color) 
Normal status: Greed, Leakage or Wrong Position Alarm: Red
Output Relay contact × 1ea
Normal status: Closed, 
Leakage or Wrong Position Alarm: Open, 
Power Failure: Open
Output Capacity DC24V,1A (resistance load)
Ambient Temp -10〜60℃
Case Material ABS
Weight Approx. 100g
Wiring Connection Input: Connector × 8ea (insert - locked) 
Power/Output: Connector × 1ea (insert - locked)
Installation Snap-on DIN Rail, or screwed on the base plate.
Detection Unit RS-3000FA, RS-3000FAP

Download PDF

RS-3500

Quick Detection for variety of liquid. (PNP OUTPUT)

・PNP model Developed for the U.S.A market
・It’s possible to use as the integrated monitor, which numerous Detectors connect to Control unit (RS-3500), or as the Alarm monitoring system, which numerous detect connect to PLC.
・Body of RS-3500 (Control Unit) also is fabricated by PFA, which allows use with most liquids and chemicals, and suitable for use in varied applications, particularly chemical blend and dispenser.

Specification

After leak detection, simple wipe the detection surface. much easier process than with detection tape or a liquid absorbing model.

・Body and cable are protected by PFA
・Suitable for export equipment, CE marking, UL certified.
・RS-3000C unit has DIN rail installation feature without auxiliary parts
・Easily viewable green LED signifies normal operations when red LED turns on, Liquid is detected and output is shut off.

RS-3500 Series Control Unit

Model RS-3500FA RS-3500FAP
Voltage DC12V to DC24V (±10%)
Current 20mA or below
LED Display Normal Status : Green
Leakage Alarm :Red
Wrong position Alarm: Red
Output PNP transistor open collector, 50mA max, Normal: ON
Ambient Temp -10〜60℃
Material Case PFA
Cable FEP, 3-wire sheath
LED Epoxy resin (embedded in the case)
Water Protect Sealed, Equivalent IP67(IEC)
Weight Approx. 40g
Absorbent Paper Use Not Use
Bracket P/N-6440(PVC) P/N-6430(PVC)

RS-3500 Series Control Unit

・Output of the control unit, RS-3500C is a relay, NC contact, which makes fit with fail-safe architecture.
・Compact in size of RS-3500C unit with connector wiring helps easier and reliable wiring job.
RS-3500 Series Control Unit
Model RS-3500C
Voltage DC24V(±10%)
Current 200mA or below
Number of Input 1 to 8 detection units max
LED Display Independent display for each Input 
(LED 8ea ×Green or Red either color) 
Normal status: Greed, Leakage or Wrong Position Alarm: Red
Output Relay contact × 1ea
Normal status: Closed, 
Leakage or Wrong Position Alarm: Open, 
Power Failure: Open
Output Capacity DC24V,1A (resistance load)
Ambient Temp -10〜60℃
Case Material ABS
Weight Approx. 100g
Wiring Connection Input: Connector × 8ea (insert - locked) 
Power/Output: Connector × 1ea (insert - locked)
Installation Snap-on DIN Rail, or screwed on the base plate.
Detection Unit RS-3500FA, RS-3500FAP

Download PDF

RS1000 Series