Standard Liquid Leak Sensor RS-1000 Series

By optical detecting principle, most all kinds of liquid can be detected quickly.
No adjustment is required for the sensor, then very few risk for setting error Versatile on performance, and low cost on its expense for both of human and material.

RS-1000C & RS-1000*

Controller & Sensor,　Available for many detected points

The unique effects of optical method enable reliable detection of small leaks and viscous liquids.
Relay contact Output signal makes it easy to construct the interlock function.
Recommend RS-1000C and RS-1000 to customers particularly in case that there are many detected points.

Specification

RS-1000 Series Detection Unit

		RS-1000F	RS-1000P	RS-1000FP	RS-1000PP
Supply Voltage		5 VDC ±5%
Power Consumption		20mA max
Indication of LED		Red: Leakage , Green: Normal
Ambient Temperature		-10～60 deg C (14～140 deg F)
Connection with Control Unit		All Detection Unit must be used with RS-1000C or RS-1000CA Control Unit
Material	Case	PFA	PP	PFA	PP
	Cable	FEP	HT-PVC	FEP	HT-PVC
	LED LAMP	Epoxy (embedded)		Epoxy (embedded)
Water Proofing		Sealed Silicon Stuffed		Sealed Silicon Stuffed
Weight		Appx,50g		Appx,50g
Absorbent Paper		Required		Not Required
Selectable Bracket		P/N-6417, P/N-6418, P/N-6419		P/N-6416, P/N-6420B

RS-1000 Series Control Unit

	RS-1000C	RS-1000CA
Input Voltage	5 VDC ±5%
Power Consumption	150mA below	200mA below
Light of Leak Indicator (Red)	On: Leakage , Off: Normal
Relay Contact Output	NO contact x1 pole	NO contact x8 poles, independent
Ambient Temperature	-60～60 deg C (14～140 deg F)
Capacity of Relay Contact (Max)	24 VDC,1A (Resistance load)
Case Material	ABS polymer
Weight	Appx,90g	Appx,300g

Download PDF

RS-1000 Brochure (274KB)

RS-1000 Operation Manual (492KB)

RS-1000*A

NPN Transistor Open collector. Internal Amplifier

・Fail Safe Design - Output current is conducted in normal dry conditions and will turn off in the presence of liquid.
・This liquid leak detector is suitable for the integrated monitoring and also individual monitor.
・This model can operate the load directly with its own output, without the RS-1000C Controller.

Specification

RS-1000*A Series Detection Unit

		RS-1000FA -24V	RS-1000PA -24V	RS-1000FAP	RS-1000PAP
Supply Voltage		5 - 24 VDC ±5%
Power Consumption		20mA max
Indication of LED		Red: Leakage , Green: Normal
Ambient Temperature		-10〜60 deg C (14〜140 deg F)
Output		NPN Transistor Open Collector 50mA max, 2 opposite signals (Leakage - ON and Normal - ON)
Material	Case	PFA	PP	PFA	PP
	Cable	FEP	HT-PVC	FEP	HT-PVC
	LED LAMP	Epoxy (embedded)		Epoxy (embedded)
Water Proofing		Sealed Silicon Stuffed		Sealed Silicon Stuffed
Weight		Appx,50g		Appx,50g
Absorbent Paper		Required		Not Required
Selectable Bracket		P/N-6417, P/N-6418, P/N-6419		P/N-6416, P/N-6420B